Home page

Composite Fire Blanket (Explosion-Proof Type) FHT-01

Excellent fire protection effect.
Excellent explosion-proofing.
Excellent heat dissipation.
Good construction.
Can be used repeatedly with a long service life.
Temperature resistance up to 1000℃.

Message

Product

产品描述

Commodity name: Composite Fire Blanket (Explosion-Proof Type) FHT-01

Composite Fire Blanket (Explosion-Proofing Type) FHT-01

Excellent fire protection effect.

Excellent explosion-proofing.

Excellent heat dissipation.

Good construction.

Can be used repeatedly with a long service life.

Temperature resistance up to 1000℃.

Product Introduction
The Composite Fire Blanket (Explosion-Proofing Type) FHT-01 is a novel flexible cable protection product that excels in fire resistance, thermal insulation, and explosion-proof capabilities. Featuring an innovative design and a unique structure, it is straightforward to install and disassemble. Primarily, it is used to safeguard cables and intermediate joints, enhancing the fire and explosion resistance of these components in medium and high voltage power cables. It effectively suppresses high-voltage arcs caused by short circuit faults in intermediate joints, thereby diminishing the potential risk of injury to personnel from cable joint accidents.

Attentions
1.Before installation, it is necessary to clean the vicinity of the cable to ensure that there are no sharp or large hard objects, and to prevent scratching the explosion-proof blanket and affecting the product's performance
2.When wrapping explosion-proof blankets, it is necessary to wrap them tightly to avoid large gaps between each layer of explosion-proof blankets that may affect product performance
3.When using fire-resistant tape to wrap around both ends of the explosion-proof blanket, avoid debris adhering to the tape, which may affect its adhesion and protective performance
4.When using fireproof tape for wrapping, extend the wrapping 200mm to both sides of the explosion-proof blanket port to ensure protective effect

Typical properties

Place of Origin	Hunan China
Brand Name	Changlan
Model Size	1000mm10005mm(thickness)/Customized
Applications	Solar,Wind energy,Mining,Electricity,Submarine
Type	Teflon Anti-arc Cloth
Color	Grey
Tensile Strength(MPa)	≥ 3.5
Tear Strength(kV/MM)	≥ 20
Breakdown Strength(kV/MM	≥ 20
Volume Resistivity(Ω.CM)	≥1*10¹³
Combustion Performance Class	≥Class A2
Fire Resistance Temperature ℃	-50~1000
Post-combustion Integrity (%)	≥90 (No obvious damage was found after burning at 750℃for 1 hour)